Kenmore 9082 Whirlpool W10413645A Water Filter2 EDR2RXD1


Free Shipping on Orders Over $59.00!
Fits Some Whirlpool, Maytag & KitchenAid Freezer on Bottom Units. Located Inside The Refrigerator In A Flip Down Compartment At The Ceiling!

Name Range Discount
Multi-Packs 3 - 5 5.0 %
Multi-Packs 6 - 12 7.5 %
SKU: KM9082-FILTER2-EDR2RXD1 Category:


Reduces contaminants such as chlorine taste and odor, industrial chemicals, metals, minerals, pharmaceuticals, pesticides, waterborne parasites, and more.
Replaces Part Numbers: W10413645A, EDR2RXD1, W10790814, AP5983562, PS11722126, AH11722126, EAP11722126, 2400649, AH3502128, AP5322615, EAP3502128, PS3502128, Kenmore 9082.

EDR2RXD1 W10413645A Replacement Instructions

  1. Locate filter compartment at the ceiling inside the flip down cover.
  2. You might have to remove the upper shelf for more room.
  3. Push on the filter cover to open filter compartment.
  4. The filter will drop down and to remove you will push in and turn counterclockwise and pull straight out. (the water will shut off automatically)
  5. Discard the old filter.
  6. Line the knotch on end of the new filter upward.
  7. Push the new filter into the fridge with knotch facing up and gently push filter while twisting clockwise till it locks into place.
  8. Push filter upward till it locks in the compartment and close the cover.
  9. Re-install Shelf (if taken out)
  10. Reset your change filter light (if your fridge has one)


Resetting Your Filter Change Indicator

  1. Press and hold the dispenser LOCK and AUTO-LIGHT buttons on the dispenser at the same time for 4 seconds.
  2. OR: until the filter status indicator begins to flash, then release the buttons.


The EveryDrop EDR2RXD1 Water Filter Is Found For The Following Models.

Additional information

Weight 1 lbs