Kenmore 9082, 9924 – Filter 2, edr2rxd1

Price range: $31.00 through $75.00
FREE S&H

Kenmore Brand Filters

Fits Following Models

Kenmore 106.7940241
Kenmore 106.79402410
Kenmore 106.7940341
Kenmore 106.79403410
Kenmore 106.7947241
Kenmore 106.79472410
Kenmore 106.79472411
Kenmore 106.7947341
Kenmore 106.79473410
Kenmore 106.79473411
Kenmore 1067940241
Kenmore 10679402410
Kenmore 1067940341
Kenmore 10679403410
Kenmore 1067947241
Kenmore 10679472410
Kenmore 10679472411
Kenmore 1067947341
Kenmore 10679473410
Kenmore 10679473411
Kenmore 596.7238241
Kenmore 596.72382410
Kenmore 596.723824102
Kenmore 596.72382411
Kenmore 596.72382413
Kenmore 596.7238341
Kenmore 596.72383410
Kenmore 596.72383411
Kenmore 596.72383413
Kenmore 596.7238941
Kenmore 596.72389410
Kenmore 596.72389411
Kenmore 596.72389412
Kenmore 596.72389413
Kenmore 59672382410
Kenmore 596723824102
Kenmore 59672382411
Kenmore 59672382413
Kenmore 59672383410
Kenmore 59672383411
Kenmore 59672383412
Kenmore 59672383413
Kenmore 59672389410
Kenmore 59672389411
Kenmore 59672389412
Kenmore 59672389413


Description

46-9082 Kenmore Water Filter 2 Replace 46-9903

Located Inside the Fridge at the Ceiling In a Flip Down Tray.
Replaces Part Numbers: W10744238, W10413645A, W10680605, EDR2RXD1, W10790814, AP5983562, PS11722126, AH11722126, EAP11722126, 2400649, AH3502128, AP5322615, EAP3502128, PS3502128, Kenmore 9924, 46-9924, 9082, 46-9082, 9903, 46-9903.

Replacement Instructions

  1. Locate filter compartment at the ceiling inside the flip down cover.
  2. You might have to remove the upper shelf for more room.
  3. Push on the filter cover to open filter compartment.
  4. The filter will drop down and to remove you will push in and turn counterclockwise and pull straight out. (the water will shut off automatically)
  5. Discard the old filter.
  6. Line the notch on end of the new filter upward.
  7. Push the new filter into the fridge with notch facing up and gently push filter while twisting clockwise till it locks into place.
  8. Push filter upward till it locks in the compartment and close the cover.
  9. Re-install Shelf (if taken out)
  10. Reset your change filter light (if your fridge has one)

Resetting Your Filter Change Indicator

  1. Press and hold the dispenser LOCK and AUTO-LIGHT buttons on the dispenser at the same time for 4 seconds.
  2. OR: until the filter status indicator begins to flash, then release the buttons.

Filter2 Tips

Maintenance For Refrigerator Water Filtration System.

  1. Flush Filter with Water from Dispenser (Approximately 2 gallons) until Water Runs Clear and air is purged from system.
  2. Write the date of installation on the filter and mark your calendar for 4 – 6 months as a reminder to Change Your Filter.

CONSIDER THESE OPTIONS !